Payment & Shipping Terms:
|Frequency:||28Khz And 40Khz||Time Range:||1~99(Min)|
Heating and Timing Ultrasonic Blind Cleaning Machine 10L Tool Cleaner
Ultrasonic is widely used throughout industries to remove difficult contaminants from the parts during or after manufacturing process which might require a stage of cleaning before the next process. In general, if an item can be cleaned with liquid, it can be cleaned much faster and more thoroughly with an ultrasonic cleaner. Compared with traditional solvent/scrubbing, our ultrasonic cleaners:
Shenzhen Dekang Cleaning Electronic Appliance Co.,Limited is a comprehensive new high-tech enterprise whichspecialized in the research&development, productction and sale of household,commercial,laboratorial,industrial high-power ultrasonic cleaner ect.Especially,we also can customize non-standard products to meet customer
Now our products are composed of household ultrasonic cleaner,mutifunctional aweep ultrasonic cleaner,power adjustable ulltrasonic cleaners,smart dual-bands ultrasonic cleaner,dihital ultrasonic cleaner,mechanical ultrasonic cleaner,industrial ultrasonic cleaner,submersible ultrasonic transducer etc.All of our standard products have achieverd most internation standards,such as CE certification,ROHS certification,FCC certification etc.
Our ultrasonic cleaner are suitable to clean irregular and complex specialized instruments,components and PCBs of sundry shops,workshops,factories etc.Also could cleane tooth.
Please check the pictures as below,it shows the variation after using our cleaner.As we can see the effect is obvious.
Instructions as below:
1. Fill the stainless steel tank with cleaning solution; Plug the power lead into grounded outlet; After power-on, the temperature displays the actual environmental temperature, LED displays 3 minutes (default ultrasonic time).
3.Temperature setting: Press “temperature-/temperature+”shortly at a time means time increase or reduce 1℃ at a time, press and hold there means time will increase or decrease by 10℃ . Usually, the best cleaning temperature is within 40℃ to 60℃.
2.Time setting: Press the “TIME-/TIME+ ”shortly at a time means time increase/reduce 1min at a time, press and hold means time will increase/reduce by 10mins continuously. The cleaning stops when the timer counts down to 00:00. If the unit needs to be stopped before the timer runs up, press “Ultrasonic” button.
NOTE: Do not run the cleaner continuously for more than one hour
4. After time and heat setting, press “Heating” or “ultrasonic” button to start both function. Press “Heating” button again, the heating function will stop. The same for Ultrasonic Function.
6. Drain: press the “drain” button to open or close the automatic valve. The automatic valve will close a certain time (10 minutes in default) later after drain.
7. Empty the tank and clean both the outside and inside of the cleaner with a clean and dry cloth for next use.
NOTE: Do not pour water out until it’s cooling, Hot water will hurt you and damage the machine itself.
All Dekang’s standard products have achieved most international standards, such as CE certification, RoHS certification, FCC certification etc. Besides, all no-standard products also can satisfy all requirements of these most international standards.
3 days after confirm the payment ,Express Including YOUSU,UPS,DHL,FedEx,Air transportion,Sea transportation,Also you could ask your courier to pick the goods.
Have a wind varity of plug,such as:UL,SABS,SAA,VDE,JAPAN OLUGE,THE UK PLUGE .