Payment & Shipping Terms:
|Tank Size(mm):||300*155*150||Overall Size(mm):||330*180*357|
|Ultrasonic Power(W):||0-180||Heating Power(W):||300|
Ultrasonic cleaning is a technology that uses high frequency sound waves (ultrasonic: above the range of human hearing) to agitate an aqueous or organic medium (cleaning chemistry) that in turn acts on contaminants adhering to substrates like metals, plastics, glass, rubber and ceramics.
Multifunctional ultrasonic cleaners are suitable to clean irregular and complex specialized instruments, components and PCBs of sundry shops, workshops, factories, etc; smash, emulsify, scatter, hydrolyze, extract, degas certain analyzed stuffs in lab
. Die casting stainless steel tank
. Industrial grade integrated circuit
. 0-100ºC temperature range
.1 sec-99 min 59 secs or always on
. LCD screen and power adjustable
. Power cut memory function
. Deawaxing and degreasing function
. Degas, pulse, power and turbo sweep working mode
. Auto stand-by, sleep, and wake-up by one key-press mode
. Digital controller of high-precision and a long service-life
|Timing Range (min:secs):||00:01~99:59/Always on|
|Temperature Range(ºC):||0~100 ºC|
All Dekang’s standard products have achieved most international standards, such as CE certification, RoHS certification, FCC certification etc. Besides, all no-standard products also can satisfy all requirements of these most international standards.
Medical and surgical instruments in a variety of sizes and complexity can pose challenges when it comes to cleaning, disinfecting and sterilizing them after use. An ultrasonic cleaner is an ideal tool for the first step in this three step process to protect medical personnel and patients from possible infection due to pathogens that remain on the instruments after a procedure.
Suggested Ultrasonic Cleaning Procedure
In all cases manufacturers’ instructions should be followed when using an ultrasonic cleaning process. These are representative steps.
Fill the ultrasonic cleaning tank with an approved medical instrument cleaning solution such as CLN-LR012 available from Tovatech following dilution instructions provided. Turn the cleaner on to start the degassing process. This step removes entrained air in new solutions that interferes with the efficiency of cavitation and takes approximately 10 minutes.
In the meantime:
At the end of the cycle, remove the instruments from the ultrasonic cleaning bath and thoroughly rinse them to remove all traces of the cleaning solution. Deionized water rinses will avoid spotting. If the instruments are not to be immediately disinfected and sterilized be certain that they are thoroughly dried and protected. Part reassembly can occur after sterilization.
Procedures should be in place to guide the replacement of used ultrasonic cleaning solutions. In some instances it is recommended that solution be drained and tanks thoroughly cleaned and dried after each ultrasonic cleaning cycle. Most solutions available today are biodegradable, which facilitates disposal but local authorities should be consulted on proper practices.